100mm (DN) Mission Rubber Single Flap Non-Return Valve - Spigot to Spigot

Specifications

Product Type: Non-Return Flap Valve
Model Type: Single Flap Spigot to Spigot
Nominal Diameter: 100mm
Material: 
     Body & Flap - PVCu
     Seal - Ethylene Propylene Diene Monomer (EPDM) to BS EN 681-1
Approx. Weight: 2kg

This Mission PVCu single flap non-return valve is designed for use within sewerage and drainage systems to eliminate the risk of flood damage by the backflow of sewage or flood water into properties through low level entries; such as low level drain gullies, toilets and washing machine outlets. The valve has a spigot to spigot design for connection to other pipe material using Mission Rubber Flexible Couplings.

Note: Coupling required is dependent on size of pipework

Product Features at a Glance:

• Recommended for foul systems
• Prevents backflow through low level entries
• Watertight to a pressure of 0.5 bar (5m Head)
• Complies with the requirements of BS EN 13564 - 'Anti-flooding devices for buildings'.
• Complies with international standards for sewage pipe connections.

Manufacturers Advice:

• General Locations - Flap valves should be fixed so as to avoid the accumulation of debris around the invert which could prevent the valve operating correctly.
• Tidal Locations - Turbulence of flow due to severe wave action will shorten the working life of a flap valve. Therefore it is recommended that careful consideration is given to the positioning of valves and they are installed within an outfall bay or otherwise protected from direct wave action by baffles.

Mission Flexible Drainage Fittings
Mission Rubber (UK) Ltd is part of the worldwide Mission Rubber group of companies who, over 50 years ago, invented the flexible rubber coupling for the sewerage, drainage and plumbing industries. Since then Mission has grown to become the world´s No 1 manufacturer of rubber flexible couplings with manufacturing plants in both America and Europe, and distributors worldwide.

Flexible rubber drainage fittings offer a perfect solution to joining pipes of various materials in drainage, sewerage and plumbing installations. They consist of a rubber body with stainless bands that enable them to compress down uniformly, onto different sizes and types of pipe, to form a reliable, airtight and watertight seal. It is a robust design that is aided, in some couplers, by a centre shear band which provides resistance against heavy earth loads and shear forces, helping to ensure pipe alignment with joint flexibility.

Flexible rubber fittings are ideal for joining plastic drainage pipes to other drainage materials such as clay, concrete, twinwall, stainless steel, cast iron and pitch fibre.

Key Features of Mission Fittings:

• Unique “Lock In Place” Rubber Profile
  • Made from EPDM rubber
  • Ensures clamps and shear band are properly positioned
  • Remain firmly in place during transit, stocking or installation on site
  • Internal stepped sealing lines achieve a better sealing effect
  • Additional EPDM sealing material can be compressed through sealing lines - giving special advantage for sewer pipes with rough surfaces e.g. concrete pipes
• TOX - TECHNOLOGY Clinching Process
  • No spot welding of clamps to the shear band- heat created during the welding process burns the stainless steel
  • Eliminates negative aspects associated with spot welding
  • Bond meets or exceeds all relevant tensile strength and shear requirements
  • Incorporated in the shear bands on all Mission couplings

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.