110mm Socket/Spigot 112.5dg Bend

Specifications

Application Type: 110mm Ring Seal Soil System
Product Type: Socket/Spigot Bend
Connection Type: Push-Fit
Brand: FloPlast
Diameter: 110mm
Angle: 112.5 deg (67.5 deg)
Width: 200mm
Depth: 182mm
Length: 132mm
Material: PVCu
Standards: Kitemark No. KM 544331

This Socket/Spigot 110mm Soil Pipe Bend is used to create a 112.5 degree change in direction along a 110mm Soil Pipe System. It uses a push-fit design for connection to a 110mm Ring Seal Soil System that provides an efficient means of waste water drainage and foul discharge from appliances. This bend has a spigot fitting at one end, which should always form the lower joint, and a socket fitting at the other end.

Product Features at a Glance:

• Provides an efficient means of waste water drainage and foul discharge from appliances.
• Manufactured in PVC-U to give a strong and durable product.
• Lightweight and easy to install.
• Suitable for high temperature waste discharge.
• Push-Fit joint through an innovatively designed seal and snap cap system.

Manufacturers Advice: Silicone lubricant should be applied to the seals in the socket end of the fitting as well as the spigot end to help facilitate the connection to other 110mm Ring Seal Soil pipes and fittings.

FloPlast Soil & Waste Systems

Since its foundation in 1991, FloPlast has established itself as a manufacturer of high quality plastic building and plumbing systems for the construction industry, in particular domestic and commercial new build and refurbishment projects.

They offer an extensive choice of systems and products, in a range of sizes and colours, to suit all tastes and applications. Their Soil & Waste Systems offer a comprehensive, integrated and modern range of products for all soil and waste applications.

Features & Benefits

• Components have a consistent high gloss finish and colour and are essentially maintenance free.
• Tough and durable, yet lightweight for ease of installation.
• Compatible with most other existing materials and systems manufactured to British/European Standards.
• Manufactured to British/European Standards specification where applicable.
• Colour matching between systems facilitates colour coordination where sanitary pipework is located externally.

Working Temperature

FloPlast's Soil & Waste Systems may be used to carry liquids, when subjected to a continuous flow, with a maximum temperature of 76 degrees C. Intermittent discharges of up to 100 degrees C may occur, provided that a duration of less than two minutes is observed.

Pipework Support (BSEN 12056:2000 Maximum distances for support)

Size              Vertical            Horizontal

32mm            1.2m                  0.5m

40mm            1.2m                  0.5m

50mm            1.2m                  0.6m

110mm          2m                     1m

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.