125mm Yellow PE80 SDR17.6 Gas Pipe Coil

Specifications

Product Type: Mains Supply Pipe
Application Type: Low/Medium Pressure Gas
Size (OD): 125mm 
Pipe Length: 50m & 100m coils
Material: Medium DensityPolyethylene (MDPE)
Material Strength: PE80
Minimum Required Strength (MRS): 8.0MPa (Megapascal)
Standard Dimension Ratio: SDR17.6
Pressure Resistance: 3 bar
Standards: GIS/PL2-2
Approx. Weight (p/mtr): 2.71kg 

This 125mm Yellow Gas Mains Pipe is made from co-extruded virgin, solid wall PE80 (MDPE) material, making it ideal for low/medium pressure gas applications. Manufactured to GIS/PL2-2 standards, this pipe

Manufacturer Note: All Peak gas products are manufactured and tested in accordance with GIS / PL2 specifications and hold Kitemark certification.

Product Features at a Glance:

• SDR17.6 rated
• Tough Yellow PE80 MDPE material
• Durable for long term performance
• Fully approved to stringent gas industry standards
• Compatible with a range of 125mm push-fit fittings from JDP
• Available in the following coil sizes:
  • 50m - 1815mm dia x 195mm (135.28kg)
  • 100m - 1810mm dia x 300mm (270.56kg)

Please Note:Pipe dimensions based on the PE water pipe specification BS EN 12201:2 provided for guidance only.

The UK gas industry is renowned for strictly governed approvals and standards, against which all gas pipes need to be qualified. This pipe is fully approved to these stringent Gas Industry Standards quality criteria, and has proven performance material characteristics that outlast metallic pipework, making it ideal for both upgrading older pipework as well as designing a new system.

Coils of PE pipe are a preferred method for installers due to a reduction in joints throughout the system. All coils are capped and carefully banded to allow safe transportation, storage and handling on site.

Peak Pipe Systems Polyethylene 

Peak Pipe Systems are one of the UK's largest manufacturers and suppliers of high quality polyethylene pipe and utility pipe; tested, accredited and approved against key industry standards.

All of their standard products are produced using high grade virgin PE100 & PE80 polymer, both high-density and medium-density polyethylene grades with exceptional pressure ratings and durability.

Key Features of Polyethylene Pipe:

• High flexibility and lightweight
• Low friction and high flow rate
• Resistance to corrosion
• Can be installed quickly and consistently in cold and warm weather.
• Suitable for various installation methods
• Cost saving in transportation and installation
• Specifically design to least a targeted 100 years in operation
• Material properties outperform metallic alternatives and minimise costly maintenance and rehabilitation processes.

Polyethylene has the ability to expand and contract with continuous fluctuating operating system pressures, this continual flexibility whilst maintaining structural strength means the network remains leak free and suitable for continual use in a variety of ground conditions.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.