160mm Blue PE100 SDR11 Water Mains Pipe Coil

Specifications

Product Type: Mains Supply Pipe
Application Type: Potable Water
Size (OD): 160mm 
Nominal Bore: 129.8mm
Wall Thickness: 15.1mm
Pipe Length: 50m & 100m coils
Material: High DensityPolyethylene (HDPE)
Material Strength: PE100
Minimum Required Strength (MRS): 10.0MPa (Megapascal)
Standard Dimension Ratio: SDR11
Pressure Nominal: PN16
Water Pressure Resistance: 16 bar
Standards: EN 12201
Approx. Weight (p/mtr): 6.73kg 

This 160mm Potable Water Blue mains pipe is manufactured with a black core, high density PE100 and a co-extruded dark blue PE100 skin. Ideal for use in below ground potable systems up to 16 bar maximum operating pressure.

Important Note: Use 160mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. Use black HDPE for above ground water distribution instead of blue HDPE.

Product Features at a Glance:

• 16 bar maximum operating pressure
• SDR 11-rated
• Tough Blue PE100 HDPE material
• Compatible with a range of 160mm push-fit fittings from JDP
• Available in the following coil sizes:
  • 50m - 1815mm dia x 195mm (336.69kg)
  • 100m - 1810mm dia x 300mm (673.38kg)

Please Note: Pipe dimensions based on the PE water pipe specification BS EN 12201:2 provided for guidance only.

Polyethylene is a highly flexible, robust and sustainable material for use in our clean water networks. These pipes can withstand high pressure applications and are therefore suitable for a variety of industries.

Coils of PE pipe are a preferred method for installers due to a reduction in joints throughout the system. All coils are capped and carefully banded to allow safe transportation, storage and handling on site.

Peak Pipe Systems Polyethylene 

Peak Pipe Systems are one of the UK's largest manufacturers and suppliers of high quality polyethylene pipe and utility pipe; tested, accredited and approved against key industry standards.

All of their standard products are produced using high grade virgin PE100 & PE80 polymer, both high-density and medium-density polyethylene grades with exceptional pressure ratings and durability.

Key Features of Polyethylene Pipe:

• High flexibility and lightweight
• Low friction and high flow rate
• Resistance to corrosion
• Can be installed quickly and consistently in cold and warm weather.
• Suitable for various installation methods
• Cost saving in transportation and installation
• Specifically design to least a targeted 100 years in operation
• Material properties outperform metallic alternatives and minimise costly maintenance and rehabilitation processes.

Polyethylene has the ability to expand and contract with continuous fluctuating operating system pressures, this continual flexibility whilst maintaining structural strength means the network remains leak free and suitable for continual use in a variety of ground conditions.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.