80mm Unperforated Land Drainage Pipe (50m Coil)

Specifications

Colour: Black
Type: Unperforated
Nominal Size: 80mm
Minimum Internal Diameter: 65mm
Nominal External Diameter: 80mm
Coil Length: 50m
Weight: 0.27kg/m (13.5kg total)
Dwells: 100 per meter
Minimum Ring Stiffness: >2.00kN/m2
Typical Ring Stiffness: 6.6kN/m2

This 50m coil of black 80mm unperforated land drain is a single wall, corrugated pipe manufactured from high-density polyethylene intended to allow fast and easy installation and excellent water flow.

Unperforated land drain is designed for distributing collected surface water as, unlike perforated coils, they have no holes for water to drain in to. This is primarily for attenuation where water is stored and sent to a watercourse (such as a stream or river), a soakaway/french drain, attenuation crates or a water storage tank.

Customer Advice: When installing land drain, the trench you dig needs to be wider than the diameter of the pipe and MUST be at least 450mm deep. This is important if you are planning on aerating your lawn - the pipe must be deep enough so it's not damaged by spiking or other maintenance - Check out our Basic Guide to Land Drain for more advice and information.

Key Features:

• Manufactured from HDPE
• Unperforated - solid/no holes
• Corrugated - for extra strength
• Ideal for use in attenuation systems
• Cost effective solution for most projects
• Non-kite marked
• Made in accordance with BS4962:1989

Please note: This pipe is not suitable for use as a dispersal drain for septic tanks. All images shown are used for illustration purposes only and may differ from the actual product supplied.

Manufacturer's Advice: Long term storage outside can result in damage to the product by UV degradation. Storage longer than 12 months is therefore not recommended.