PLASSON 90dg MDPE Compression Tee with Threaded Female Offtake

Specifications

Product Type: MDPE Tee
Model Type: 90dg Tee with Threaded Female Offtake
Nominal Diameter Mains: 20mm - 110mm
Threaded Outlet Diameter: 1/2” – 4” (Imperial)
Body Material: Polypropylene, high-grade copolymer
Water Pressure Rating: PN 16
Weight: 0.11kg – 4.19kg

This PLASSON 90 degree tee is designed for use with MDPE water pipe to create a 90 degree branch from the main line with a female offtake. Able to withstand working pressures of up to 16 bar, this WRAS approved product is suitable for use in systems conveying water and other fluids in urban and inter-urban infrastructure, industrial, mining, landscape and farming, as well as optical fibre duct systems.

Please note: PTFE tape is strongly recommended in threaded joints.

Product Features:

• Quality Compression fitting
• Parallel female thread
• Fast and simple to install
• Available in sizes from 20mm to 110mm
• Tested to high standards - ISO 17885 for Water Applications, AS/NZS 4129, ISO 7/1, BS 21, DIN 2999, UNI 9561, NEN 3258, AS 1722, DIN 8076

Product Components:

• 2 Split Rings (Polyacetal)
• 2 O Rings (NBR)
• 2 Nuts (Polypropylene, high-grade copolymer)

Available Sizes: (Please ensure to select the correct option before purchase)

• 20mm x 1/2" (for creating a 1/2” threaded female branch from the main line of 20mm x 20mm)
• 20mm x 3/4" (for creating a 3/4” threaded female branch from the main line of 20mm x 20mm)
• 25mm x 1/2" (for creating a 1/2” threaded female branch from the main line of 25mm x 25mm)
• 25mm x 3/4" (for creating a 3/4” threaded female branch from the main line of 25mm x 25mm)
• 25mm x 1" (for creating a 1” threaded female branch from the main line of 25mm x 25mm)
• 32mm x 1” (for creating a 1” threaded female branch from the main line of 32mm x 32mm)
• 50mm x 1 1/2" (for creating a 1 1/2” threaded female branch from the main line of 50mm x 50mm)
• 50mm x 2” (for creating a 2” threaded female branch from the main line of 50mm x 50mm)
• 63mm x 1 1/4” (for creating a 1 1/4” threaded female branch from the main line of 63mm x 63mm)
• 63mm x 1 1/2” (for creating a 1 1/2” threaded female branch from the main line of 63mm x 63mm)
• 63mm x 2” (for creating a 2” threaded female branch from the main line of 63mm x 63mm)
• 90mm x 3” (for creating a 3” threaded female branch from the main line of 90mm x 90mm)
• 110mm x 4” (for creating a 4” threaded female branch from the main line of 110mm x 110mm)

Customer Notice - Chemical Resistance: Polyacetal split rings and NBR o-rings, suitable for water, are supplied as standard. CPVC split rings and EPDM or FPM o-rings and seals are available. For aggressive chemical applications, the end user is advised to test suitability.

Customer Notice - Operating Temperatures: While these fittings can withstand the same temperature as polyethylene pipe, they are not intended for use in hot water applications. However, they will withstand sub-zero temperatures.

 Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.