110mm "Cast Iron" Style Niagara Ogee Gutter Running Outlet

Specifications

Application Type: Rainwater Gutter
Profile Type: 110mm Niagara Ogee
Product Type: Running Outlet
Outlet Size: 65mm/68mm
Brand: FloPlast
Width: 137mm 
Depth: 185mm
Length: 264mm
Material: PVCu
Colour: "Cast Iron" Style 
Compatible Downpipe: 65mm Square/68mm Round
Max Serviceable Roof Area*: 194m2 (level), 229m2 (with fall)
Standards: Manufactured to BS EN 607
                      Kitemarked - KM501316

This 110mm Niagara Ogee multi-fit running outlet is designed to join two gutter lengths together and provide an outlet to either a 65mm square or 68mm round downpipe. Unlike a Stopend Outlet, a Running Outlet can be installed at the centre of the gutter run to increase the maximum flow rate, and serviceable roof area, of the system. It forms part of a Niagara Ogee guttering system that provides a cost-effective solution for new builds, refurbishments, conservatories, and extensions in areas of heavy rainfall. The "Cast Iron" style colouring offers the aesthetic appeal of traditional cast iron guttering systems whilst retaining all the benefits of of PVCu, making it easy to install with good flow capacity and a 20-year colour guarantee.

Product Features at a Glance:

• An ornate (K-Style) profile.
• High capacity system.
• Connects two lengths of Niagara Ogee gutter.
• Outlet connects to a 65mm square/68mm round downpipe.
• Ideal for outlet placement at centre of gutter run.
• Can be used on grade 1 listed properties.
• 20 year “Cast Iron” colour guarantee.
• Water-tight seal and retaining clip pre-fitted for fast user friendly installation.
• Extremely cost effective solution for old style refurbishment and new build installations.
• Covered by BSI Kitemark – no. KM501316.
• Manufactured to BS EN 607 standards.

Manufacturer’s Advice: Fascia brackets should be installed at a maximum of 1m apart along each gutter length and within 150mm of any other joint or fitting. FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

*Recommended max figures for a 110mm Niagara gutter system connected to a 65mm square downpipe at the centre of the gutter run.

FloPlast "Cast Iron" Style Niagara Ogee Guttering System

FloPlast is a well-established manufacturer and supplier of Plastic Building and Plumbing systems to the UK construction sector. They specialise in Roofline products with an extensive range of Rainwater systems, including the “Cast Iron” Style Niagara Ogee gutter.

Features & benefits

• New generation "Cast Iron" style Rainwater System.
• 20 Year "Cast Iron" Colour Guarantee.
• Significant cost saving over traditional Cast Iron.
• Pre-fitted gutter seal retaining clip system for fast user-friendly installation.
• Pre-lubricated seals.
• External fixing lugs on shoes and pipe sockets.
• Black fixing bolts available to complement traditional look.
• All the benefits of PVC, for quick and easy installation.

Gutter Flow Rates

With a max flow rate of 2.61 litres/sec for a gutter system installed with a 1:350 fall ratio (2.16 l/s if installed level), the Niagara Ogee gutter system, connected to a 65mm Square downpipe via a stopend outlet, is suitable for a maximum roof area of 125m2 (104m2 if installed level).

With a max flow rate of 4.77 litres/sec for a gutter system installed with a 1:350 fall ratio (4.05 l/s if installed level), the Niagara Ogee gutter system, connected to a 65mm Square downpipe via a running outlet at the centre of the gutter run, is suitable for a maximum roof area of 229m2 (194m2 if installed level).

System Standards
FloPlast’s Half Round guttering products are designed and manufactured to the following standards:

• BSI Kitemark number: KM 501316 – BS EN 607, BS EN 12200 and BS EN 1462 Plastic rainwater, piping and guttering systems for above ground use – Unplasticized poly vinyl chloride (PVC-U.
• BS EN 607 – Eaves gutters and fittings made of PVC-U.
• BS EN 1462 – Brackets for eaves gutters.
• BS EN 12200-1 – Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U).
• BS EN 681 – Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic elastomers.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.