Skip to main content
112mm "Cast Iron" Style Half Round Gutter - 4m.
  • 112mm "Cast Iron" Style Half Round Gutter - 4m.

112mm "Cast Iron" Style Half Round Gutter - 4m

0302RG4CI
FloPlast 186312
3-5 working days
£39.26
£32.72 ex. VAT
Quantity:

Product Details

Specifications

Application Type: Rainwater Gutter
Profile Type: 112mm Half Round
Product Type: Gutter Length
Brand: FloPlast
Width: 112mm 
Height: 52mm
Length: 4000mm (4m)
Material: PVCu
Colour: "Cast Iron" Style 
Compatible Downpipe: 68mm Round 
Max Serviceable Roof Area*: 40m2 (level), 50m2 (with fall)
Standards: Manufactured to BS EN 607
                     Kitemarked - KM501316

This 112mm Half Round 4m gutter length is designed to collect rainwater running off your roof and channel it away into a drainage system. It forms part of a Half Round guttering system that provides a cost-effective solution for new builds, refurbishments, conservatories, and extensions. The "Cast Iron" style colouring offers the aesthetic appeal of traditional cast iron guttering systems whilst retaining all the benefits of of PVCu, making it easy to install with good flow capacity and a 20-year colour guarantee.

Product Features at a Glance:

  • The original Half Round profile.
  • Cost effective.
  • Good flow capacity.
  • Pre-lubricated seals.
  • 20 year “Cast Iron” colour guarantee.
  • Pre-fitted gutter seal retaining clip system for fast user friendly installation.
  • Can be used on grade 1 listed properties.
  • All the benefits of PVC for quick and easy installation.
  • Covered by BSI Kitemark – no. KM501316.
  • Manufactured to BS EN 607 standards.

Manufacturer’s Notice: For optimum performance of "Cast Iron" Style Half Round gutter systems, we recommend the use of FloPlast "Cast Iron" Style 68mm Round downpipe system. FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

*Recommended max figures for a 112mm Half Round gutter system connected to a 68mm Round downpipe at the end of the gutter run. For larger roof areas, consider using a "Cast iron" Style Half Round Running Outlet at the centre of the gutter run or upgrading to a "Cast Iron" Style Hi-Cap gutter system.

FloPlast "Cast Iron" Style Half Round Guttering System

FloPlast is a well-established manufacturer and supplier of Plastic Building and Plumbing systems to the UK construction sector. They specialise in Roofline products with an extensive range of Rainwater systems, including the “Cast Iron” Style Half Round gutter.

Features & benefits

  • New generation `Cast Iron` style Rainwater System.
  • 20 Year `Cast Iron` Colour Guarantee.
  • Significant cost saving over traditional Cast Iron.
  • Pre-fitted gutter seal retaining clip system for fast user-friendly installation.
  • Pre-lubricated seals.
  • External fixing lugs on shoes and pipe sockets.
  • Black fixing bolts available to complement traditional look.
  • All the benefits of PVC, for quick and easy installation.

Gutter Flow Rates

With a max flow rate of 1.05 litres/sec for a gutter system installed with a 1:350 fall ratio (0.82 l/s if installed level), a Half Round gutter system, connected to a 68mm Round downpipe via a stopend outlet, is suitable for a maximum roof area of 50m2 (40m2 if installed level).

With a max flow rate of 2.34 litres/sec for a gutter system installed with a 1:350 fall ratio (1.62 l/s if installed level), a Half Round gutter system, connected to a 68mm Round downpipe via a running outlet at the centre of the gutter run, is suitable for a maximum roof area of 113m2 (77m2 if installed level).

System Standards
FloPlast’s Half Round guttering products are designed and manufactured to the following standards:

  • BSI Kitemark number: KM 501316 – BS EN 607, BS EN 12200 and BS EN 1462 Plastic rainwater, piping and guttering systems for above ground use – Unplasticized poly vinyl chloride (PVC-U.
  • BS EN 607 – Eaves gutters and fittings made of PVC-U.
  • BS EN 1462 – Brackets for eaves gutters.
  • BS EN 12200-1 – Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U).
  • BS EN 681 – Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic elastomers.

 

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.

SKU:
0302RG4CI
Availability:
3-5 working days
Product Type:
Gutter
Install Type:
Half round
Nominal Size:
112mm
Brand:
FloPlast
Courier:
Y