114mm Square Line Gutter - 3m

Specifications

Application Type: Rainwater Gutter
Profile Type: 114mm Square Line
Product Type: Gutter Length
Brand: FloPlast
Width: 114mm 
Depth: 60mm
Length: 3000mm (3m)
Material: PVCu
Compatible Downpipe: 65mm Square
Max Serviceable Roof Area*: 73m2 (level), 86m2 (with fall)
Standards: Manufactured to BS EN 607
                      Kitemarked - KM501316

This 114mm Square Line 3m gutter length is designed to collect rainwater running off your roof and channel it away into a drainage system. Its contemporary rectilinear profile, that is particularly suited to modern properties, offers a flow capacity that exceeds that of the traditional Half Round gutter. It forms part of a Square Line guttering system that provides a cost-effective solution for new builds, refurbishments, conservatories, and extensions in areas of heavy rainfall. Easy to install with good flow capacity and a 10-year performance and colour guarantee.

Product Features at a Glance:

• A square (box) profile.
• Lightweight.
• Easy to install.
• Increased flow capacity over Half Round gutters.
• Available in multiple colour options.
• FloPlast 10 year colour and performance guarantee
• Covered by BSI Kitemark – no. KM501316.
• Manufactured to BS EN 607 standards.

Manufacturer’s Notice: For optimum performance of Square Line gutter systems, we recommend the use of FloPlast’s 65mm Square downpipe system. FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

*Recommended max figures for a 114mm Square Line gutter system connected to a 65mm Square downpipe at the end of the gutter run. For larger roof areas, consider using a Running Outlet at the centre of the gutter run.

FloPlast Square Line Guttering System

FloPlast is a well-established manufacturer and supplier of Plastic Building and Plumbing systems to the UK construction sector. They specialise in Roofline products with an extensive range of Rainwater systems, including the Square Line gutter.

Features & benefits

• Attractive rectilinear profile.
• Flow capacity in excess of Half Round.
• Pre-fitted gutter seal retaining clip system for fast user-friendly installation.
• Pre-lubricated gutter seals.
• Cost effective solution for both new build and refurbishment applications.
• Connects to most other metal or plastic systems using our extensive range of adaptors.
• Adjustable Angles 50° – 156° are available.
• System is covered by a BSI Kitemark – no. KM501316.

Gutter Flow Rates

With a max flow rate of 1.80 litres/sec for a gutter system installed with a 1:350 fall ratio (1.53 l/s if installed level), the Square Line gutter system, connected to a 65mm Square downpipe via a stopend outlet, is suitable for a maximum roof area of 86m2 (73m2 if installed level).

With a max flow rate of 3.55 litres/sec for a gutter system installed with a 1:350 fall ratio (3.06 l/s if installed level), the Hi-Cap gutter system, connected to a 65mm Square downpipe via a running outlet at the centre of the gutter run, is suitable for a maximum roof area of 170m2 (147m2 if installed level).

System Standards
FloPlast’s Square Line guttering products are designed and manufactured to the following standards:

• BSI Kitemark number: KM 501316 – BS EN 607, BS EN 12200 and BS EN 1462 Plastic rainwater, piping and guttering systems for above ground use – Unplasticized poly vinyl chloride (PVC-U.
• BS EN 607 – Eaves gutters and fittings made of PVC-U.
• BS EN 1462 – Brackets for eaves gutters.
• BS EN 12200-1 – Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U).
• BS EN 681 – Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic elastomers.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.