Specifications

Application Type: Rainwater Gutter
Profile Type: 76mm MiniFlo (Half Round)
Product Type: Gutter Angle
Brand: FloPlast
Width: 50mm
Depth: 127mm
Length: 127mm
Angle: 90-degrees
Material: PVCu
Standards: BS EN 607, BS EN 12200 -1, BS EN 1462

This 76mm MiniFlo 90-degree gutter angle is designed to create a 90-degree bend, either internal or external, in a MiniFlo gutter system. It provides a cost-effective solution for smaller installations such as sheds, garages, and conservatories.

Product Features at a Glance:

• A smaller system based on the original Half Round profile.
• Pre-fitted gutter seal retaining clip system for fast user friendly installation.
• Pre-lubricated seals.
• A practical, easy to install system.
• An ideal solution for garages, sheds, summer houses and most garden buildings.
• Manufactured to BS EN 607 standards.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.

Product Details

FloPlast MiniFlo Guttering System

FloPlast is a well-established manufacturer and supplier of Plastic Building and Plumbing systems to the UK construction sector. They specialise in Roofline products with an extensive range of Rainwater systems, including the MiniFlo gutter.

Features & benefits

• For use on small roof areas, such as Sheds, Conservatories, Greenhouses and Carports.
• 76mm Gutter and Fittings with 50mm Downpipe and fittings.
• Single fix Gutter/Downpipe bracket.

System Standards

FloPlast’s MiniFlo guttering products are designed and manufactured to the following standards:

• BS EN 607 – Eaves gutters and fittings made of PVC-U.
• BS EN 1462 – Brackets for eaves gutters.
• BS EN 12200-1 – Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U).
• BS EN 681 – Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic elastomers.

Installation Advice

MiniFlo gutter angles should be supported with fascia brackets within 150mm of the fitting. FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

For optimum performance of MiniFlo gutter systems, we recommend the use of FloPlast 50mm Round downpipe system.