Flexseal Multibush for DN150 Pipes

Specifications

Product Type: Flexible Rubber Drainage Fitting
Model Type: Multibush
Brand: Flexseal
Nominal Diameter: DN150
Length: 200mm
Width: 85mm
Depth: 200mm
Weight: 0.57kg
Colour: Black
Material: EPDM Rubber
Standards: WIS 4-41-01
                     BS EN 681-1

This Flexseal DN150 Multibush is a foldable bush that adapts to three thicknesses and enables it to suit multiple connection scenarios. This is ideal when it is unclear which pipe materials need to be connected as it will connect pipes of any standard wall thickness. For example, a 150mm Multibush can act as a 4mm, a 8mm or a 12mm bush for a 175-200mm Flexseal Standard Coupling and connect clay to PVC, clay to cast iron, ductile iron to twinwall and many more.

Not only does the Multibush make connecting pipe to pipe less complex, this DN150 Multibush is also suitable for use with the Flexseal FA Unisaddle 150mm; allowing the user to connect any DN150 pipe into larger diameter main concrete drainage pipes.

Product Features at a Glance:

• Made from EPDM rubber.
• Quick and easy to install.
• 3 connection options in 1 product.
• Can be cut into sections via the fold and used as a singular bushes.
• Suitable for use with Shear Banded Couplings to create an adaptor connection that is approved for use on adopted sewer and drainage applications.
• Suitable for use with Lateral Connection Saddles.

Manufacturers Advice: On unadopted drainage pipelines a suitable Adaptor Coupling could be used when two pipes to be connected have significantly different outside diameters. When connecting adopted drainage pipelines, water companies specify, under WIS 4-41-01, that a Shear Banded Coupling must be used to protect pipe alignment against vertical shear loads and therefore a Shear Banded Coupling and Bush should be used.

Flexseal Bushes

Flexseal has been certified by the British Standards Institution (BSI) as a company of assessed capability, with a quality management system which meets the requirements of BS EN ISO 9001:2015. They are the leaders in wastewater connection innovation; utilising the most advanced methods and techniques for precision-manufactured products, all of which comply with or exceed relevant British and European standards to ensure reliability and sustainability.

Their range of Bushes are simple rings of EPDM rubber that are available in various diameters and at various thicknesses. Bushes are used as an additional component part of either Shear Banded Couplings or Lateral Connection Saddles. The purpose of a bush is to increase the outside diameter of a pipe to be connected if the pipe is too small for the coupling being used or the saddle being used. The bush will simply fill the void between the outside of the pipe and the inside of the coupling.

Features & benefits

• Bushes are used when outside diameters of the pipes to be connected are significantly different.
• Can be manufactured to suit specific site and application requirements.
• Provide a high-performance seal on low pressure pipes.
• Versatility in application enables the bush to be used when an increase in pipe outside diameter is needed.
• Manufactured to meet the WIS standard.
• Conform to BS EN 681-1.
  
  

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.