PLASSON ElectroFusion Branch Saddle

Specifications

Product Type: MDPE Saddle
Model Type: Electrofusion Branch Saddle
Nominal Diameter Mains: 50mm - 180mm
Nominal Diameter Outlet: 32mm - 63mm
Material: PE100 polyethylene
Water Pressure Rating: PN16
Gas Pressure Rating: PE100 SDR 11
Weight: 0.39kg – 0.98kg

This electrofusion branch saddle is specially designed to fit around an existing length of pipe and create a branch off the main line. Being able to wrap around the pipe eliminates the need to cut it and re-join the two pieces, effectively making it possible to create a branch almost anywhere along the pipe line with ease. Electrofusion is a highly effective means of joining MDPE pipework, using built in electric heating elements in the fitting to create a strong, reliably secure joint when fussed to the pipe.

Product Features:

• Made from PE100 polyethylene
• Creates a strong and reliable joint
• Suited to SD7 to SDR 11 pipes
• Available in sizes from 20mm – 180mm
• WRAS approved
• Conforms to ISO 4427, ISO 8085, EN 1555, EN 12201, AS/NZS 4129, AFNOR NF 136

All fittings are BS EN 12201 and BS EN 1555 approved and are fitted with 4.0mm pins. PLASSON electrofusion fittings can be used with PLASSON’s computerised SmartFuse System control box, Fusamatic control boxes, barcode reading and by manual control boxes.

Available Sizes: (Please ensure to select the correct option before purchase)

• 63 x 32 (to create a 32mm branch off a 63mm pipe)
• 63 x 63 (to create a 63mm branch off a 63mm pipe)
• 90 x 32 (to create a 32mm branch off a 90mm pipe)
• 90 x 63 (to create a 63mm branch off a 90mm pipe)
• 90 x 90 (to create a 90mm branch off a 90mm pipe)
• 110 x 32 (to create a 32mm branch off a 110mm pipe)
• 110 x 50 (to create a 50mm branch off a 110mm pipe)
• 110 x 63 (to create a 63mm branch off a 110mm pipe)
• 110 x 90 (to create a 90mm branch off a 110mm pipe)
• 125 x 32 (to create a 32mm branch off a 125mm pipe)
• 125 x 50 (to create a 50mm branch off a 125mm pipe)
• 125 x 63 (to create a 63mm branch off a 125mm pipe)
• 125 x 90 (to create a 90mm branch off a 125mm pipe)
• 160 x 32 (to create a 32mm branch off a 160mm pipe)
• 160 x 50 (to create a 50mm branch off a 160mm pipe)
• 160 x 63 (to create a 63mm branch off a 160mm pipe)
• 160 x 90 (to create a 90mm branch off a 160mm pipe)
• 180 x 32 (to create a 32mm branch off a 180mm pipe)
• 180 x 50 (to create a 50mm branch off a 180mm pipe)
• 180 x 63 (to create a 63mm branch off a 180mm pipe)
• 180 x 90 (to create a 90mm branch off a 180mm pipe)

Customer Advice: Plasson EF fittings are produced from PE materials approved for use with potable water and gas. For other media please contact us for further information.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.