PLASSON ElectroFusion Free Nut Female Coupler

Specifications

Product Type: MDPE Coupler
Model Type: Electrofusion Free Nut Female Transition Coupler
Nominal Diameter Mains: 25mm – 63mm
Nominal Diameter Outlet: 3/4" – 2”
Material: PE100 polyethylene, brass (thread)
Water Pressure Rating: PN16
Weight: 0.15kg – 0.77kg

This electrofusion free nut transition coupler is designed to connect a length of metric MDPE pipe and an imperial male threaded fitting. It offers reliable, high performance pipe joining of MDPE pipe. Electrofusion is a highly effective means of joining MDPE pipework, using built in electric heating elements in the fitting to create a strong, reliably secure joint when fussed to the pipe.

Product Features:

• Made from PE100 polyethylene with a brass thread
• Creates a strong and reliable joint
• For water use only
• PN16 rated
• Suited to SD7 to SDR 11 pipes
• WRAS approved
• Conforms to ISO 4427, ISO 8085, EN 1555, EN 12201, AS/NZS 4129, AFNOR NF 136

All fittings are BS EN 12201 and BS EN 1555 approved and are fitted with 4.0mm pins. PLASSON electrofusion fittings can be used with PLASSON’s computerised SmartFuse System control box, Fusamatic control boxes, barcode reading and by manual control boxes.

Available Sizes: (Please ensure to select the correct option before purchase)

• 25mm x 3/4" (to connect 25mm Metric MDPE to a 3/4" Imperial fitting)
• 32mm x 1” (to connect 32mm Metric MDPE to a 1" Imperial fitting)
• 50mm x 1” (to connect 25mm Metric MDPE to a 1" Imperial fitting)
• 63mm x 2” (to connect 25mm Metric MDPE to a 2" Imperial fitting)

Customer Advice: Plasson EF fittings are produced from PE materials approved for use with potable water and gas. For other media please contact us for further information.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.