PLASSON ElectroFusion Male Transition Brass Coupler

Specifications

Product Type: MDPE Coupler
Model Type: Electrofusion Male Transition Coupler
Nominal Diameter Mains: 90mm
Material: PE100 polyethylene
Water Pressure Rating: PN16
Gas Pressure Rating:  PE100 SDR 11
Weight: 0.13kg - 0.92kg

This PLASSON male transition coupler is designed to create a connection between a length of metric MDPE pipe and a female threaded imperial fitting. It creates a reliable, high performance pipe joint that aids long system life. Electrofusion is a highly effective means of joining MDPE pipework, using built in electric heating elements in the fitting to create a strong, reliably secure joint when fussed to the pipe.

Product Features:

• Made from PE100 polyethylene
• Creates a strong and reliable joint
• Brass thread for imperial connection
• PN16 rated
• Suited to SD7 to SDR 11 pipes
• Available in sizes from 25mm – 180mm
• Conforms to ISO 4427, ISO 8085, EN 1555, EN 12201, AS/NZS 4129, AFNOR NF 136 

All fittings are BS EN 12201 and BS EN 1555 approved and are fitted with 4.0mm pins. PLASSON electrofusion fittings can be used with PLASSON’s computerised SmartFuse System control box, Fusamatic control boxes, barcode reading and by manual control boxes.

Available Sizes: (Please ensure to select the correct option before purchase)

• 20 x 1/2" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 25 x 3/4" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 32 x 1/2" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 32 x 3/4" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 32 x 1" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 32 x 1 1/4" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 32 x 1 1/2" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 50 x 1" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 50 x 1 1/4" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 50 x 1 1/2" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 50 x 2" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 63 x 1 1/4" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 63 x 1 1/2" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)
• 63 x 2" (to create a connection between a 20mm MDPE pipe and a 1/2" imperial fitting)

Customer Advice: Plasson EF fittings are produced from PE materials approved for use with potable water and gas. For other media please contact us for further information.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.