PLASSON ElectroFusion Reducing Tee

Specifications

Product Type: MDPE Tee
Model Type: Electrofusion 90dg Tee
Nominal Diameter Mains: 25mm - 180mm
Material: PE100 polyethylene
Water Pressure Rating: PN16
Gas Pressure Rating: PE100 SDR11
Weight: 0.11kg – 6.95kg

This PLASSON electrofusion tee is designed to join two lengths of equal diameter MDPE pipe whilst creating a 90 degree branch to a third smaller diameter pipe. Electrofusion is a highly effective means of joining MDPE pipework, using built in electric heating elements in the fitting to create a strong, reliably secure joint when fussed to the pipe.

Product Features:

• Made from PE100 polyethylene
• Creates a strong and reliable joint
• PN16 rated
• Suited to SD7 to SDR 11 pipes
• Available in sizes from 25mm – 180mm
• WRAS approved
• Conforms to ISO 4427, ISO 8085, EN 1555, EN 12201, AS/NZS 4129, AFNOR NF 136

All fittings are BS EN 12201 and BS EN 1555 approved and are fitted with 4.0mm pins. PLASSON electrofusion fittings can be used with PLASSON’s computerised SmartFuse System control box, Fusamatic control boxes, barcode reading and by manual control boxes.

Available Sizes: (Please ensure to select the correct option before purchase)

• 25mm x 20mm (for creating a 90 degree branch to 20mm MDPE from a 25mm main line)
• 32mm x 20mm (for creating a 90 degree branch to 20mm MDPE from a 32mm main line)
• 32mm x 25mm (for creating a 90 degree branch to 25mm MDPE from a 32mm main line)
• 50mm x 20mm (for creating a 90 degree branch to 20mm MDPE from a 50mm main line)
• 50mm x 25mm (for creating a 90 degree branch to 25mm MDPE from a 50mm main line)
• 50mm x 32mm (for creating a 90 degree branch to 32mm MDPE from a 50mm main line)
• 63mm x 20mm (for creating a 90 degree branch to 20mm MDPE from a 63mm main line)
• 63mm x 32mm (for creating a 90 degree branch to 32mm MDPE from a 63mm main line)
• 63mm x 50mm (for creating a 90 degree branch to 50mm MDPE from a 63mm main line)
• 90mm x 63mm (for creating a 90 degree branch to 63mm MDPE from a 90mm main line)
• 110mm x 63mm (for creating a 90 degree branch to 63mm MDPE from a 110mm main line)
• 110mm x 90mm (for creating a 90 degree branch to 90mm MDPE from a 110mm main line)
• 125mm x 90mm (for creating a 90 degree branch to 90mm MDPE from a 125mm main line)
• 125mm x 110mm (for creating a 90 degree branch to 110mm MDPE from a 125mm main line)
• 160mm x 90mm (for creating a 90 degree branch to 90mm MDPE from a 160mm main line)
• 160mm x 110mm (for creating a 90 degree branch to 110mm MDPE from a 160mm main line)
• 180mm x 90mm (for creating a 90 degree branch to 90mm MDPE from a 180mm main line)
• 180mm x 125mm (for creating a 90 degree branch to 125mm MDPE from a 180mm main line)
• 180mm x 160mm (for creating a 90 degree branch to 160mm MDPE from a 180mm main line)

Customer Advice: Plasson EF fittings are produced from PE materials approved for use with potable water and gas. For other media please contact us for further information.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.