Skip to main content
Push-Fit Reducer Fitting.
  • Push-Fit Reducer Fitting.

Push-Fit Waste Reducer - 40 - 32mm

1-3 working days
3-5 working days
£1.26 ex. VAT

Product Details


Application Type: Push-Fit Waste System
Product Type: Reducer
Connection Type: Push-Fit
Brand: FloPlast
Diameter: 40 - 32mm
Width: 47mm
Depth: 47mm
Length: 57mm
Material: Polypropylene
Standards: BS EN 1451-1

This Push-Fit Waste Reducer is designed to be a quick, easy way to enable a connection between a 40mm Push-Fit waste pipe system and a 32mm Push-Fit waste pipe system. Manufactured from Polypropylene, to BS EN 1451-1 standards, the Reducer has one socketed end, with push-fit ring seal fittings, and one plain.

Product Features at a Glance:

  • Enables connection between 40mm and 32mm waste systems.
  • Quick and easy to install.
  • Secure push-fit ring seal system.
  • Requires no solvent welding.
  • Made from Polypropylene.

Manufacturers Advice: For ease of installation use Silicone Lubricant on the plain end of the fitting/wastepipe as well as the push-fit ring seal of the socketed end. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. It is recommended that Polypropylene waste systems, where externally installed, are protected against prolonged exposure to sunlight with exterior gloss paint.

FloPlast Soil & Waste Systems

Since its foundation in 1991, FloPlast has established itself as a manufacturer of high quality plastic building and plumbing systems for the construction industry, in particular domestic and commercial new build and refurbishment projects.

They offer an extensive choice of systems and products, in a range of sizes and colours, to suit all tastes and applications. Their Soil & Waste Systems offer a comprehensive, integrated and modern range of products for all soil and waste applications.

Features & Benefits

  • Components have a consistent high gloss finish and colour and are essentially maintenance free.
  • Tough and durable, yet lightweight for ease of installation.
  • Compatible with most other existing materials and systems manufactured to British/European Standards.
  • Manufactured to British/European Standards specification where applicable.
  • Colour matching between systems facilitates colour coordination where sanitary pipework is located externally.

Working Temperature

FloPlast's Soil & Waste Systems may be used to carry liquids, when subjected to a continuous flow, with a maximum temperature of 76 degrees C. Intermittent discharges of up to 100 degrees C may occur, provided that a duration of less than two minutes is observed.

Pipework Support (BSEN 12056:2000 Maximum distances for support)

Size              Vertical            Horizontal

32mm            1.2m                  0.5m

40mm            1.2m                  0.5m

50mm            1.2m                  0.6m

110mm          2m                     1m


Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.

Within 3 Working Days
Product Type:
Install Type: