Product Details
Specifications
Product: RAINBOX® Cube Crates/Base Plate
Gross Volume: 205 litres/25 litres
Storage Volume: 195 litres/20 litres
Void Ratio: 96%/80%
Length: 800mm
Width: 800mm
Depth: 320mm/40mm
Weight: 8kg/4kg
Max. Installation Depth: 4.25 metres
Loading Class (GVW): up to 60 tons
Vertical Loading: 34 tonnes/m2 (340kN/m2)
Lateral Loading: 8.2 tonnes/m2 (82kN/m2)
BBA Approved: Yes - certificate 15/5200
The RAINBOX® Cube system is designed for use in non-trafficked and trafficked areas (with a Gross Vehicle Weight of 60 tons), and can be installed in soakaway (infiltration) or storage (attenuation) applications for surface and storm water management. The system is comprised of base plates, crates and side faces, in various number and configuration depending on the project, with up to 14 layers being possible per base plate.
Product Features and Benefits
- Easy to install - modular design requires few accessories to connect crates. They can also be installed without the use of heavy machinery.
- Up to 96 % storage volume – each crate has a gross volume of 205 litres and a storage volume of 195 litres.
- Straight connection to 100mm, 150mm and 200mm (ID) ULTRA3 pipework (or alternative EN1401-1 / EN 13476-2 pipework). Adaptors for twinwall and other pipe types available from JDP.
- Installation depth of up to 5 metres - even under very heavy loads, allowing up to 14 layers to be used.
- High load-bearing - the RAINBOX® Cube system has as a heavy-duty load-bearing capacity of up to 60 tons with a 2.25m earth covering.
- Service life of over 50 years – with a durable product design that ensures sustainability.
- Eco-friendly product - creates can be stacked into each other, minimising transport costs, storage space and CO2 emissions.
- Inspectable & jettable - suitable for water jetting with a pressure rating of 120 bar. An inspection access point can be cut into the side face of a RAINBOX® Cube crate. The profile of the system allows for full inspection without the need of further cut outs to crates.
As geocellular crates, RAINBOX® systems act as an underground reservoir to collect water through drainage systems, from storms and persistent rain, to prevent flooding. In areas of development, this function helps to counteract the loss of permeable ground that would have originally soaked up the rainwater naturally. The collected water is then dispersed in one of two ways, depending on whether the crates are installed in an attenuation system or a soakaway system."
Attenuation System
In an attenuation scheme, water is stored within the system, and with flow controls, is slowly released back into a watercourse or sewer system.
Soakaway System
In soakaway schemes, the system is wrapped with a permeable membrane. Water is collected and slowly soaks back in to the ground through an infiltration process.
Minimum and maximum loading depths vary due to application and ground conditions. A structural design check of the system should be performed in line with CIRIA C680 prior to installation, provided free of charge from JDP Technical Support. The tables below are offered for reference only.
Maximum Depth of Installation (to base of units (m)1)
| Typical Soil Type | Soil Weight (kN/m2) | Angle of Internal Friction (degrees) 2 | Landscaped Areas | Vehicle Weight <9 tonnes 3 | Vehicle Weight <30 tonnes | Vehicle Weight <60 tonnes |
| Over consolidated stiff clay | 20 | 24 | 2.75 | 2.50 | 2.25 | 2.25 |
| Silty sand clay | 19 | 26 | 3.00 | 2.75 | 2.50 | 2.50 |
| Loose sand and gravel | 18 | 30 | 3.75 | 3.50 | 3.25 | 3.25 |
| Medium dense sand and gravel | 19 | 34 | 4.25 | 4.00 |
3.75 |
3.75 |
| Dense sand and gravel | 20 | 38 |
4.25 |
4.50 | 4.25 | 4.25 |
Minimum & Maximum Cover Depths
| Landscaped Area | Vehicle Weight <3 tonnes 4 | Vehicle Weight <9 tonnes | Vehicle Weight <12 tonnes | Vehicle Weight <30 tonnes | Vehicle Weight <60 tonnes | |
| Minimum cover depth (m) | 0.30 | 0.50 | 0.70 | 0.80 | 0.90 | 1.10 5 |
| Maximum cover depth (m) | 2.75 | 2.75 | 2.75 | 2.75 | 2.50 | 2.25 |
Notes
1. Without groundwater present. EcoBloc Flex may be used where groundwater is present, contact JDP for technical advice.
2. The design is very sensitive to small changes in the assumed value of φ, therefore, it is recommended that these values are confirmed by a chartered geotechnical engineer.
3. Applicable for car parks or other areas trafficked only by cars or LGVs. Infrequent accidental load from heavier vehicles may be possible.
4. This category should be used when considering landscaped areas that may be trafficked by ride on mowers.
5. Including 200mm concrete slab.
Assumptions made:
- Ground above and to the sides of the tank is horizontal.
- Shear planes or other weaknesses are not present within the structure of the surrounding soil.
JDP offers free consultation and drainage system designs for all foul and surface water drainage management systems. Contact JDP to discuss your requirements.
Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.
