Flow: 3 litres/sec
Peak Flow Rate: 30 litres/sec
Drainage Area: 1670m2
Silt Storage Capacity: 300 litres
Oil Storage Capacity: 45 litres
Access Shaft Diameter: 600mm
Base to Inlet Invert: 1420mm
Base to Outlet Invert: 1320mm
Standard Fall Across: 100mm
Min Inlet Invert: 500mm
Standard Pipe Diameter: 160mm
Clearwater Bypass Separators separate oil, chemical or solids from surface water to ensure they don’t pollute the surrounding environment and water course.
This 1670m2 Bypass Separator is rota-moulded from polyethylene, making it compact and robust in structure whilst also being light and easy to handle/install on site.
- Class 1 design
- Fitted inlet/outlet connectors
- Vent points in necks
- Maintenance from ground level
This type of system is suitable in areas that it is considered acceptable to not provide treatment for higher flow rates, i.e. storm water, meaning there would have to be very little chance of a spillage and heavy rainfall occurring simultaneously. This is necessary as anything above 6.5mm/hr of rainfall will bypass the main chamber of the separator.
Typically this type of separator is installed in:
- Surface Car Parks
- Lightly contaminated commercial areas
Within the main chamber of this system there is capacity for:
- Oil separation
- Oil storage volume
- Silt storage
Please Note: all images are used for illustration purposes only and may differ from the actual product supplied.
- 5 - 7 working days