PLASSON Multiport Manifold 2” End Feed

Specifications

Product Type: Multiport Manifold
Model Type:  2” End Feed
Nominal Diameter Outlet: 25mm
Nominal Diameter Mains: 2”
Number of Ports: 3, 4 or 6
Weight: 1.87kg, 2.16kg – 2.89kg

This PLASSON multiport manifold is designed to connect incoming water mains and enable its separation into individual supply pipes for isolation and connection of multiple users. This is an end feed model available with either three, four or six ports. End feed manifolds can be joined together to allow for a greater number of ports to accommodate the largest of installations.

Product Features:

• Ideal for multi-occupancy dwellings
• Water service pipe is connected to the 2” BSP thread and channeled to each outlet
• Available in 3,4 and 6 port options
• 2” BSP threaded connection at each end allows manifolds to be connected together
• Dead leg kit required to blank off end, to remove possibility of stagnant water

Water supply connection to multi-use buildings requires several components to meet water company requirements/regulations. Multiport manifolds can be used in conjunction with the meter mount kits and other PLASSON components to ensure the installation meets the required standards/approvals.

Available Sizes: (Please ensure to select the correct option before purchase)

• 25mm x 3 outlets
• 25mm x 4 outlets
• 25mm x 6 outlets

Manufacturers Advice: Plasson Fittings and Valves are designed for cold water applications up to 20 Degrees C and will withstand sub-zero temperatures. It is strongly recommended that BSP threads are assembled with PTFE tape to ensure a leak free joint.

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.