Push-Fit Waste Tee

Specifications

Application Type: Push-Fit Waste System
Product Type: Equal Tee
Connection Type: Push-Fit
Brand: FloPlast
Angle: 92.5 deg (87.5 deg)
Diameter: 32/40mm
Width: 47mm
Depth: 101mm
Length: 134mm
Material: Polypropylene
Standards: BS EN 1451-1

This Push-Fit Equal Tee is designed to be a quick, easy way to connect two wastepipes together at a 92.5 degree angle when constructing a wastewater system. Manufactured from Polypropylene, to BS EN 1451-1 standards, the Tee is triple socketed with push-fit ring seal fittings and is available in 32mm and 40mm diameters.

Product Features at a Glance:

• Quick and easy to install.
• Secure push-fit ring seal system.
• Requires no solvent welding.
• Available in 32 and 40mm pipe sizes.
• Made from Polypropylene.

Manufacturers Advice: For ease of installation use silicone Lubricant on the plain ends of the wastepipe/fittings as well as the push-fit ring seals of the tee. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems.

FloPlast Soil & Waste Systems

Since its foundation in 1991, FloPlast has established itself as a manufacturer of high quality plastic building and plumbing systems for the construction industry, in particular domestic and commercial new build and refurbishment projects.

They offer an extensive choice of systems and products, in a range of sizes and colours, to suit all tastes and applications. Their Soil & Waste Systems offer a comprehensive, integrated and modern range of products for all soil and waste applications.

Features & Benefits

• Components have a consistent high gloss finish and colour and are essentially maintenance free.
• Tough and durable, yet lightweight for ease of installation.
• Compatible with most other existing materials and systems manufactured to British/European Standards.
• Manufactured to British/European Standards specification where applicable.
• Colour matching between systems facilitates colour coordination where sanitary pipework is located externally.

Working Temperature

FloPlast's Soil & Waste Systems may be used to carry liquids, when subjected to a continuous flow, with a maximum temperature of 76 degrees C. Intermittent discharges of up to 100 degrees C may occur, provided that a duration of less than two minutes is observed.

Pipework Support (BSEN 12056:2000 Maximum distances for support)

Size              Vertical            Horizontal

32mm            1.2m                  0.5m

40mm            1.2m                  0.5m

50mm            1.2m                  0.6m

110mm          2m                     1m

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.