19,000 litre Klargester Washdown & Silt Separator

Specifications

Approx. application: 61+ cars, 46+ lorries per day
Capacity: 19,000 litres
Max rec. silt: 9,500 litres
Max flow rate: 52 litres/sec
Length: 6865mm
Diameter: 2075mm
Access shaft diameter: 600mm
Base inlet invert: 1940mm
Base to outlet invert: 1890mm
Standard fall across unit: 50mm
Min inlet: 500mm
Standard pipework diameter: 160mm
Approx. empty weight: 1200kg

Klargester Washdown & Silt Separators are designed for use in commercial washdown facilities that discharge directly into a foul drain. When installed, the discharge water runs into the unit where any solid contaminates, and some oils, are then separated out, leaving the waste water to continue through the foul sewer system to a local treatment works.

These separators are necessary to ensure that contaminants don’t enter the surrounding environment and potentially pollute them. Typical installation locations include:

• Car wash
• Tool hire depots
• Truck cleansing
• Construction compound cleansing points

Important Notice: the prime function of these separators is for the removal of silt.

In a commercial situation, the discharge from pressure washers must not drain into surface water systems as it carries many different potential pollutants, such as:

• Detergents
• Oil residues
• Brake dust

This means that, with the approval of the local sewerage undertaker, the washdown must only drain into foul sewer and must only occur in a designated area.

This 19,000 litre Klargester Washdown & Silt Separator is constructed from Glass Reinforced Polyester, making it resistant to rot and corrosion and lightweight relative to its size. It comes with fitted access shafts and inlets and outlets, all aiding a quick and simple installation on site.

Please Note: all images are used for illustration purposes only and may differ from the actual product supplied.