Flow: 15 litres/sec
Peak Flow Rate: 150 litres/sec
Drainage Area: 8335m2
Silt Storage Capacity: 1500 litres
Oil Storage Capacity: 225 litres
Access Shaft Diameter: 750mm
Base to Inlet Invert: 1450mm
Base to Outlet Invert: 1350mm
Standard Fall Across: 100mm
Min Inlet Invert: 700mm
Standard Pipe Diameter: 315mm
Clearwater Bypass Separators separate oil, chemical or solids from surface water to ensure they don’t pollute the surrounding environment and water course.
This 8335m2 Bypass Separator is constructed out of Glass Reinforced Plastic (GRP). This means it is light for onsite handling and easy to install.
- Class 1 design
- Fitted inlet/outlet connectors
- Vent points in necks
- Maintenance from ground level
This type of system is suitable in areas that it is considered acceptable to not provide treatment for higher flow rates, i.e. storm water, meaning there would have to be very little chance of a spillage and heavy rainfall occurring simultaneously. This is necessary as anything above 6.5mm/hr of rainfall will bypass the main chamber of the separator.
Typically this type of separator is installed in:
- Surface Car Parks
- Lightly contaminated commercial areas
Within the main chamber of this system there is capacity for:
- Oil separation
- Oil storage volume
- Silt storage
Please Note: all images are used for illustration purposes only and may differ from the actual product supplied.
- 5 - 7 working days