115mm Hi-Cap Gutter - 4m

Specifications

Application Type: Rainwater Gutter
Profile Type: 115mm Hi-Cap
Product Type: Gutter Length
Brand: FloPlast
Width: 115mm 
Depth: 75mm
Length: 4000mm (4m)
Material: PVCu
Max Serviceable Roof Area*: 88m2 (level), 111m2 (with fall)
Standards: Manufactured to BS EN 607
                     Kitemarked - KM501316

This 115mm Hi-Cap 4m gutter length is designed to collect rainwater running off your roof and channel it away into a drainage system. It is a high-capacity gutter with a deep channel that can cope with larger volumes of rainwater. It forms part of a Hi-Cap guttering system that provides a cost-effective solution for new builds, refurbishments, conservatories, and extensions in areas of heavy rainfall. Easy to install with good flow capacity and a 10-year performance and colour guarantee.

Product Features at a Glance:

• A semi-elliptical (Deep) profile.
• Lightweight.
• Easy to install.
• Increased flow capacity.
• Available in multiple colour options.
• FloPlast 10 year colour and performance guarantee
• Covered by BSI Kitemark – no. KM501316.
• Manufactured to BS EN 607 standards.

Manufacturer’s Notice: For optimum performance of Hi-Cap gutter systems, we recommend the use of either a FloPlast 68mm or 80mm round downpipe system. FloPlast recommend the use of lubricant on all gutter seals for ease of fitting and improved performance.

*Recommended max figures for a 115mm Hi-Cap gutter system connected to a 68mm round downpipe at the end of the gutter run. For larger roof areas, consider using a Running Outlet at the centre of the gutter run and/or upgrading to a 80mm downpipe system.

FloPlast Hi-Cap Guttering System

FloPlast is a well-established manufacturer and supplier of Plastic Building and Plumbing systems to the UK construction sector. They specialise in Roofline products with an extensive range of Rainwater systems, including the Hi-Cap gutter.

Features & benefits

• A semi-elliptical profile.
• High capacity-ideal for large roof areas.
• Pre-fitted gutter seal retaining clip system for fast user-friendly installation.
• High flow rate means less outlets and less drainage runs.
• Both 68mm & 80mm round downpipes can be connected to the gutter system.
• System is covered by a BSI Kitemark – no. KM501316.

Gutter Flow Rates

With a max flow rate of 2.30 litres/sec for a gutter system installed with a 1:350 fall ratio (1.84 l/s if installed level), the Hi-Cap gutter system, connected to a 68mm Round downpipe via a stopend outlet, is suitable for a maximum roof area of 111m2 (88m2 if installed level). If connected to an 80mm Round downpipe, the maximum roof area increases to 121m2 (97m2 if installed level).

With a max flow rate of 4.05 litres/sec for a gutter system installed with a 1:350 fall ratio (3.42 l/s if installed level), the Hi-Cap gutter system, connected to a 68mm Round downpipe via a running outlet at the centre of the gutter run, is suitable for a maximum roof area of 216m2 (164m2 if installed level). If connected to an 80mm Round downpipe via a running outlet, the maximum roof area increases to 238m2 (180m2 if installed level).

Please Note: All images shown are used for illustration purposes only and may differ from the actual product supplied.